- Forums
- Blogs
- Tutorial Guide On How To Replace Egr Valve On Nissan 300zx Z32
this page will show you how you can install remove and replace your EGR valve on your nissan 300zx z32 car for turbo or non turbo models [1817], Last Updated: Sat May 18, 2024
wallpaperama
Sat Jul 05, 2008
2 Comments
3691 Visits
if you dont know how an EGR valve looks like, look at the picture, the arrow in the image is pointing to the egr.
i have a 1996 nissan 300zx non turbo and the location of the EGR is behind the engine.
out of all the cars i have own, this is the hardest place where the EGR is located.
to remove and install the egr is simple, but on the 300zx is a very difficult task.
removing it is not as hard a installing it. to replace one takes alot of time and patience.
so to remove it, i had to remove the top intake manifold. once the manifold was removed i can reach the two screws in the back that bolted to the intake manifold.
once i have it removed, it gets more harder to put it back, i had to use a puller to align the holes so i can thread it back it.